From design to turnkey delivery
We engineer your industrial electrical infrastructure and coordinate procurement, installation and commissioning within one delivery plan.
- Needs assessment
- Engineering
- Turnkey delivery
EPC / INDUSTRIAL ELECTRICAL INFRASTRUCTUREBring power
Bring power
and intelligent management
together.
We design electrical infrastructure as an energy centre you can monitor and manage. From engineering and panel manufacturing to installation and commissioning, we are with you.
ONE FACILITY / EVERY STAGEThis view could not load. You can explore the other stages.
01 / EPC SCOPEEnd-to-end
End-to-end
electrical infrastructure.
Energy is one of your facility’s most critical operational resources. We plan systems together, from the grid connection to machine connections, around your production needs.
From incoming power to distribution
We install medium-voltage (MV) and low-voltage (LV) systems together with the grid connection, transformers and on-site distribution. Solar PV and battery storage integrate into this infrastructure.
- MV / LV infrastructure
- Grid and transformer
- Distribution and protection
- Solar PV and BESS integration
Connected systems. Visible production.
We install busbars, cable trays, lighting and machine power supplies. SCADA makes PLC-controlled processes visible, connecting the shop floor to management.
- Electrical panels
- Busbars and cable trays
- Lighting
- Machine power supplies
- PLC / SCADA
Fire alarms, CCTV and IT infrastructure
We plan your facility’s detection, surveillance and communications needs together. Our services cover the design, installation and commissioning of fire alarms, camera systems and IT infrastructure.
Fire detection and alarms
We install systems covering detectors, manual call points, audible and visual alarms, and fire alarm control panels.
- Detectors
- Manual call points
- Audible and visual alarms
- Fire alarm control panel
CCTV camera systems
We install IP cameras, video recording and monitoring infrastructure for entrances, production areas and shared spaces. Camera placement and recording arrangements follow the facility’s needs.
- IP cameras
- Video recording systems
- Central monitoring
IT and network infrastructure
Structured cabling, fibre links, network cabinets and wireless access provide your facility’s data communications. We plan connections between production, offices and the on-site data centre together.
- Structured cabling and fibre
- Network cabinets and switches
- Wireless networking
- Data centre connections
OUR WORK ON SITE
From our projects.
Explore our electrical infrastructure and solar projects through site photographs.
Electrical infrastructure
Bekmezci Tarım
Egg production facility
Explore the project ↗
Rooftop solar PV
Ernamaş Makina
Rooftop solar power plant
Explore the project ↗02 / PANEL MANUFACTURING AND AUTOMATIONPanels built
Panels built
for your facility.
We manufacture and commission distribution, automation, machine control and lighting panels for your facility. Choose an application to explore an illustrative panel.
The panel image could not load. You can still explore applications and component descriptions.
Main distribution panels
We manufacture main distribution panels around your facility’s power requirements. Incoming supply, protection, metering and outgoing feeders are planned together before on-site commissioning.
INSIDE THE EXAMPLE PANELProtection and metering
Protection of incoming and outgoing circuits, with electrical measurements.
From the panel to your factory’s AI centre.
Illustrative data · Example scenarioEnergy consumption0.42 kWh / part
INSIDE YOUR FACTORY
AETHER AI data centre
Energy consumption is assessed alongside production output.
03 / C&I BESS + EMSStore energy.
Store energy.
Manage intelligently with EMS.
We design C&I battery storage together with an Energy Management System (EMS). An energy infrastructure that supports critical loads, evaluates tariff opportunities and monitors production and consumption hour by hour.
Solar energy
entegrasyonu
We integrate rooftop and ground-mounted solar PV into your facility’s electrical infrastructure. Monitoring generation and consumption together helps plan the use of locally generated energy.
Solar PV + facility infrastructureExplore our solar projects ↗C&I BESS
The power of stored energy
BESS stores energy for use when needed. Backup scenarios for critical production lines and IT infrastructure are designed around battery power, capacity and the system’s transfer arrangement.
BESS + PCS + UPS integrationEnergy intelligence
EMS
The Energy Management System (EMS) evaluates generation, consumption and battery status together. We build automated charging, discharging and energy-use scenarios around tariffs and operating conditions.
EMS + meters + PLC / SCADAONE BATTERY. DIFFERENT OPERATING NEEDS.
Illustrative scenarios · No live connectionWhat does EMS decide?
INPUTSGrid · Solar PV · ConsumptionTariffs, meters and battery status
→ENERGY MANAGEMENT SYSTEMEMSMeasure. Plan. Manage.
→CONTROLBESS · PCS · FacilityCharging, discharging and power limits
Backup power planned for production and IT.
For UPS-like backup needs, we design BESS around critical loads and existing UPS infrastructure. EMS maintains a backup energy reserve; suitable power conversion and transfer equipment supports critical loads during an outage.
Example EMS decisionMaintain the backup reserve → prioritise critical loads during an outage.
Transfer time and backup duration depend on the PCS, transfer equipment, UPS, loads and battery capacity. Not every BESS provides uninterrupted UPS operation on its own.
Store at lower cost. Use when needed.
EMS evaluates the facility’s contract and tariff alongside its consumption plan. It develops scenarios for charging at favourable times, discharging at higher-cost times and reducing peak power demand.
Example EMS decisionEvaluate tariff opportunities → schedule discharge while preserving the backup reserve.
Arbitrage benefits are calculated alongside tariff differences, cycle losses, battery degradation and operating costs. No fixed savings rate is promised.
Consider generation and consumption hour by hour.
EMS compares solar generation and facility consumption hourly. It supports self-consumption by planning storage of surplus generation when conditions allow, later use and grid imports.
Example EMS decisionCalculate generation surplus and available capacity → plan storage for a later consumption period.
Netting, metering and use of stored energy are assessed against the facility’s applicable rules and connection arrangement. EMS does not replace official market settlement.
Instruction-based energy management for eligible facilities.
For facilities meeting participation requirements for TEİAŞ YAT processes, we assess the integration of instructions received through an authorised market participant or aggregator into facility controls.
Example EMS decisionEvaluate the authorised instruction → update the facility’s power plan within permitted operating limits.
Not every C&I facility is automatically eligible for YAT. General generation curtailment and YAT are different processes; routing energy to a battery is assessed only where the instruction permits it and capacity is sufficient.
EMS manages energy. AETHER AI connects it to company data.
Explore AETHER AI ↗We plan integrations that bring energy data together with production, order and cost records in the factory’s own AI data centre.
Official sources on hourly netting and YAT
EPİAŞ: hourly netting screens announcement (Turkish, new tab)
EPİAŞ: market bulletin with YAL / YAT definitions (Turkish PDF, new tab)
WHY 3M ELEKTRİK OTOMASYON?From infrastructure to operations,
From infrastructure to operations,
solutions designed together.
Production continuity
We plan protection and backup solutions to reduce the impact of grid outages and fluctuations. The potential to reduce generator use is assessed against your facility’s load profile.
Cost-focused storage
Where tariffs allow, we develop arbitrage scenarios using energy stored at lower-cost times during higher-cost periods. Economic benefits are considered alongside system losses and battery operating costs.
Measurable energy management
We monitor generation and consumption together, analyse energy use and make operational decisions clearer. EMS data can connect to other company records through the on-site AI centre.
04 / A COORDINATED PROCESSFrom the first requirement
From the first requirement
to commissioning.
Project scope, equipment selection and site installation are parts of the same plan.
- 01
Site survey and engineering
Power needs, production layout and system connections are assessed to define the installation scope.
- 02
Manufacturing and procurement
Project-specific panels are manufactured; equipment and site materials are prepared to match the installation plan.
- 03
Site installation
MV/LV, electrical and automation systems, plus low-current fire alarms, CCTV and IT/network systems, are installed and connected on site. Solar PV and BESS integration follows the project scope.
- 04
Testing and commissioning
Connections, protection and control functions are tested. PLC, SCADA and EMS scenarios are verified within the project scope before commissioning.
FACTORY MAINTENANCE / PREDICTIVE MAINTENANCEAfter installation,
After installation,
we support your production.
We support your electrical and automation infrastructure with maintenance suited to your equipment. Machine condition monitoring, maintenance planning and field work are considered together.
Predictive maintenance
For equipment with suitable sensors and data access, we develop solutions to monitor changes in temperature, vibration, current and operating data. The aim is to identify early signs of faults and prioritise maintenance.
Planned and periodic maintenance
We create inspection and maintenance plans for electrical panels, machine power supplies and automation equipment. Work is scheduled around production, equipment requirements and site conditions.
Fault analysis and field support
We investigate electrical and automation faults, carry out maintenance and perform follow-up checks within the project scope. Maintenance and downtime records support the tracking of recurring issues.
Maintenance data joins your factory’s shared intelligence.
Explore AETHER AI ↗We plan integrations that assess machine condition, maintenance history and production schedules through AETHER AI. Predictive maintenance scope depends on available data quality and equipment connectivity.